Auto Jump Starter Power Station
Featured model: Auto Jump Starter Power Station - V8
Portable Power Bank
Featured model: Portable Power Bank
Laptop Battery Pack Solution
Featured model: Laptop Battery Pack Solution
Required Device for travel and outdoors life

Products

Contact

Location:Home > Products > Auto Jump Starter > D-28

D-28

Hits:Update:2014-08-01 09:08:49【Print】【Close】

Parts List

 

#

Part Name

Quantity

 

#

Part Name

Quantity

1

Host

1

5

Home adaptor

1

2

Switch Cable A

1

6

Car Adaptor

1

3

Switch Cable B

1

7

Jumper starter cable with clamps

1

4

Cell Phone/tablet Connector

1

8

Laptop Connector

8

 

Technical Specification

 

Dimension:

 165*79*40mm

Weight: 430g

370g

Battery Capacity:

13600mAh/50.32WH

Out Voltage at Auto Starter end

 12V

Output Voltage

19V, 16V, 12V

USB Output  

5V 2.1/2A

Charge Mode:

CC/CV 15V 1A

Starting current:

250A

Peak Current:

500A(3S)

Cycle Life:

1,000times

Operating Temperature:

-20~60℃

 

FAQ

 

Q: What’s the compatible device for this starter power? 

A: This starter power can charge for mobile phone, laptop, PSP, MPS/MP4 and other consumer electronic products. The LED flash lights have different functions. The important function of this power is to start your auto in emergency.
 
 
Q: The starter power has 19V, 16V, 12V output function. How can I switch the Voltage?
A: Before charging, press round button-● to check the Voltage the device is working with. Also, there is Voltage display light on top of the Voltage to lead you. 
 
 
Q: How long I need to take to charge the starter power fully?
A: It needs to take 2.5-3 hours to charge the starter power fully.
 

Device charging instruction

1) Plug the home adaptor into the universal socket 

2) Connect 12V 1A input port of device to the other end of home adaptor
Or
A) Plug the car adaptor into the socket of cigarette lighter
B) Connect 12V 1A input port of EPOWER to the other end of car adaptor
 

Jump Start 12V Vehicle Instruction 

1) Connect the RED clamp to the vehicle’s battery positive (+) and connect the BLACK clamp to the vehicle’s battery negative(-)  

2) Plug the cord of jumper cable into the jump starter socket 
3) Start the Vehicle 
4) When the Vehicle is started, remove jumper cable from EPOWER and disconnect red and black clamps to the vehicle battery terminals within 30 seconds 
5) Keep the vehicle’s engine running 
 

Charging Cell phone or tablet instruction 

1) Plug the switch cable B to USB 5V 2A output port

2) Select appropriate connector for your cell phone or tablet and connect it to any of them. EPOWER can identify and charge the electronic device automatically. The indicating light will be on when the device is charging.
3) Press the switch button to charge. 
 

Charging/power supply to 19V Laptop

1) Plug the switch cable A to USB 19V 3.5A output port
2) Select appropriate connector for your Laptop and connect it to the switch cable A and your device 
3) Press the switch button to charge/Power supply 
For power supply to 12V vehicle products or 12V electronics 
4) Plug the optional switch cable to 12V 2A output port 
5) Connect the optional swatch cable and 12V vehicle product or 12V electronics
6) Press tge switch button to power supply
 

LED Flash Light

Press the switch 3second to start the LED flash light. There are 4 modes of LED effects (normal, strobe, SOS, Off) if you press slightly.

 

Copyright 2015 Tii Trading Inc. All rights reserved.

All brands,trademarks and registered trademarks are the property of their respective holders.

Customer Service

Working time

Monday to Sunday

9:00 - 23:00

Online customer

Telephone

1-626-962-7799

powerd by BEESCMS