Auto Jump Starter Power Station
Featured model: Auto Jump Starter Power Station - V8
Portable Power Bank
Featured model: Portable Power Bank
Laptop Battery Pack Solution
Featured model: Laptop Battery Pack Solution
Required Device for travel and outdoors life

Products

Contact

Location:Home > Products > Auto Jump Starter > X-5

X-5

Hits:Update:2014-08-02 13:08:25【Print】【Close】

Parts List

 

#

Part Name

Quantity

 

#

Part Name

Quantity

1

Host

1

5

Home adaptor

1

2

Switch Cable A

1

6

Car Adaptor

1

3

Switch Cable B

1

7

Jumper starter cable with clamps

1

4

Cell Phone/tablet Connector

1

8

Laptop Connector

8

 

 

Technical Specification

 

Dimension:

 134.7*77.5*32.6mm

Weight: 430g

325g

Battery Capacity:

8000mAh/29.6WH

Out Voltage at Auto Starter end

 12V

Output Voltage

12V

USB Output  

5V 2.1/2A

Charge Mode:

CC/CV 15V 1A

Starting current:

200A

Peak Current:

400A(3S)

Cycle Life:

1,000times

Operating Temperature:

-20~60℃

 

FAQ

Q: what functions does start power supply have?
A: 4 IN 1,  It supports power charge for mobile, PSP, MPS/MP4 and other electronic products, possessing light function of different modes, it can also guarantee emergency start for auto.
 
 
Q: How Can LED emergency lighting be turned on?
A: Turning master switch of start power to “ON” for 3 seconds to start lighting, and then press LED function to turn normal on to flickering, SOS distress signal light, press again to turn it off.
 
 
Q: How long to charge start power supply? How does it charger mobile phone and tablet PC?
A: Fully Charge take around 2-3hours. Turning master switch of start power to “ON” and then press key switch
 
 
Q: What will be happened in case make mistake to connect “+” “-“wrongly.
A: The product has a protection circuit designs. In case the circuit short is happened, the power supplying will be broken.
 

Device charging instruction

1) Plug the home adaptor into the universal socket 

2) Connect 15V 1A input port of device to the other end of home adaptor, and turn Master switch to “ON”. LCD display start flashing. Once it is full charging, the LCD will show 100% 
Or
A) Plug the car adaptor into the socket of cigarette lighter
B) Connect 12V 1A input port of EPOWER to the other end of car adaptor
 
 
Jump Start 12V Vehicle Instruction
 
1) Connect the RED clamp to the vehicle’s battery positive (+) and connect the BLACK clamp to the vehicle’s battery negative(-)  
2) Plug the cord of jumper cable into the jump starter socket 
3) Start the Vehicle 
4) When the Vehicle is started, remove jumper cable from EPOWER and disconnect red and black clamps to the vehicle battery terminals within 30 seconds 
5) Keep the vehicle’s engine running 
 
 
 
Charging Cell phone or tablet instruction
 
1) Plug the switch cable B to USB 5V 2A output port
2) Select appropriate connector for your cell phone or tablet and connect it to any of them. EPOWER can identify and charge the electronic device automatically. The indicating light will be on when the device is charging.
3) Press the switch button to charge. 
 
Warning
 
--To start the auto, the power storage of jump starter must be up 40%
--In case the battery is inflation, leakage or peculiar smell, please stop using immediately.
 

Copyright 2015 Tii Trading Inc. All rights reserved.

All brands,trademarks and registered trademarks are the property of their respective holders.

Customer Service

Working time

Monday to Sunday

9:00 - 23:00

Online customer

Telephone

1-626-962-7799

powerd by BEESCMS