Auto Jump Starter Power Station
Featured model: Auto Jump Starter Power Station - V8
Portable Power Bank
Featured model: Portable Power Bank
Laptop Battery Pack Solution
Featured model: Laptop Battery Pack Solution
Required Device for travel and outdoors life

Products

Contact

Location:Home > Products > Auto Jump Starter > k-1

k-1

Hits:Update:2014-08-02 13:08:20【Print】【Close】

Parts List

 

#

Part Name

Quantity

 

#

Part Name

Quantity

1

Host

1

5

Home adaptor

1

2

Switch Cable A

1

6

Car Adaptor

1

3

Switch Cable B

1

7

Jumper starter cable with clamps

1

4

Cell Phone/tablet Connector

1

8

Laptop Connector

8

 

 

 

Technical Specification

 

Dimension:

 155*75*24mm

Weight: 430g

430g

Battery Capacity:

12000mAh/44.4WH

Out Voltage at Auto Starter end

12V

Output Voltage

12V

USB Output  

5V/2A

Charge Mode:

CC/CV 15V/1A

Starting current:

200A

Peak Current:

400A(3S)

Cycle life

3000 times

Operating Temperature:

-20~60℃

 

FAQ

Q: How to turn off this appliance?

A: This appliance will power off automatically when no load or charging is complete 
 
Q: How many times can this appliance charge for my cell phone?
A: 7 times for iphone 4 mobile phone
 
Q: How long will this appliance take to charge my mobile phone full?
A: Approx. 1hour
 
Q: How long will this appliance on a full charge take to supply the labtop?
A: 2-3 hours
 
Q: How many times can this appliance on a full charge to start the vehicle?
A: Approx 20times
 
Q: How long the battery of this appliance can remain?
A: 3-6 months. However, we suggest recharging it every 3 months. 
 
Device charging instruction
 
1)      Plug the home adaptor into the universal socket

2)      Connect 12V 1A input port of device to the other end of home adaptor

Or

A)     Plug the car adaptor into the socket of cigarette lighter

B)     Connect 12V 1A input port of EPOWER to the other end of car adaptor

 

 

Jump Start 12V Vehicle Instruction

1)      Connect the RED clamp to the vehicle’s battery positive (+) and connect the BLACK clamp to the vehicle’s battery negative(-)  

2)      Plug the cord of jumper cable into the jump starter socket

3)      Start the Vehicle

4)      When the Vehicle is started, remove jumper cable from EPOWER and disconnect red and black clamps to the vehicle battery terminals within 30 seconds

5)      Keep the vehicle’s engine running 

 

Charging Cell phone or tablet instruction

1)      Plug the switch cable B to USB 5V 2A output port

2)      Select appropriate connector for your cell phone or tablet and connect it to any of them. EPOWER can identify and charge the electronic device automatically. The indicating light will be on when the device is charging.

3)      Press the switch button to charge. 

 

Charging/power supply to 19V Laptop

1)      Plug the switch cable A to USB 19V 3.5A output port

2)      Select appropriate connector for your Laptop and connect it to the switch cable A and your device

3)      Press the switch button to charge/Power supply

For power supply to 12V vehicle products or 12V electronics

1)      Plug the optional switch cable to 12V 2A output port

2)      Connect the optional swatch cable and 12V vehicle product or 12V electronics

3)      Press the switch button to power supply

 

 

LED Flash Light

Press the switch 3second to start the LED flash light. There are 4 modes of LED effects (normal, strobe, SOS, Off) if you press slightly.

Copyright 2015 Tii Trading Inc. All rights reserved.

All brands,trademarks and registered trademarks are the property of their respective holders.

Customer Service

Working time

Monday to Sunday

9:00 - 23:00

Online customer

Telephone

1-626-962-7799

powerd by BEESCMS